7 msec Delay, 0.6 Mile Range, Broadcast Wireless Video Camera Mount System – AB507

Description

AB507 – 5th generation featuring Revolutionary 7 msec Delay Link and 1 KM / 0.6 Miles range.

ABonAir’s AB507™ systems deliver video in a surprising 7 msec delay without compromising ABonAir’s reputation for superior video quality. In addition to the 7mSec delay, the AB500™ product family includes a proven H.264 CODEC that was explicitly designed to reduce latency and increase picture quality in wireless video systems. The range increased to a fantastic 1 KM or 0.6 Miles by CODEC-Wireless optimization.

AB507 –  ABonAir Best Wireless Video Link

The most comprehensive, feature-rich solution with all upgrade option.

ABonAir’s AB507™ wireless video system enables camera teams to transmit video directly from cameras to media centers or OB trucks wirelessly.  Built on a bi-directional radio channel between transmitter and receiver, ABonAir’s systems acknowledge the correct acceptance of each group of pixels, thus provides exceptionally robust and reliable transmission. The AB507™ enables video transmission of up to 1,000 meters (3,000 feet) by utilizing full MIMO radio employing two antennas at the transmitter and receiver to enhance performance and ensure coverage even in extreme radio signal environments.

7 msec Delay (subframe delay)

For live event coverage & multi-camera production

Low delay enables the production of multi-camera and live show without worrying about the delay caused by the simultaneous operation of different cameras or lip sync.

Portable Receiver for maximum flexibility

For fixed setups or a temporary production

Until a few years ago, only large networks could use wireless equipment because it required purchasing expensive frequency licenses from the regulator. In recent years, however, governments and regulators around the world provide unlicensed frequencies for public use for any purpose – including video transmission – allowing even smaller productions to use wireless links easily and free of charge. To answer this demand, manufacturers started to develop unlicensed solutions. Unlicensed systems’ volume grew and drove cost down, motivating big networks also to use them even though they own frequencies.

High-picture quality (+52db PSNR) with new revolutionary CODEC technology

New ground-breaking CODEC by ABonAir enables an accurate frame encoding at high speeds and excellent picture quality

Full resolution support to 1080p60, 1080i, 720p, NTSC, PAL formats and others.To be used with any camera anywhere in any production.

As an international company, ABonAir’s systems support all bit rates and formats so the system can be used at any production all over the glove with any camera type. The system support frame rates of: 1080p60, 1080i60, 1080p59.94, 1080p50, 1080PsF23.98, 1080PsF23.98, 720p60, 720p59.94, 720p50 and many others. For details check the Tech Specs. If you have a particular format or frame rate needs, just let us know and we will tailor a solution for you.

MIMO Multiple Input Multiple Output antenna array

MIMO is a method for multiplying the capacity of a radio link using multiple transmit and receive antennas to take advantage of multipath propagation. MIMO has become an essential element of wireless communication product especially those using OFDM. MIMO refers explicitly to a practical technique for sending and receiving more than one data signal simultaneously over the same radio channel by exploiting multipath propagation.

All You need is packed in 1 case

Ready to use in minutes

Wide coverage distance up to 1 KM / 0.6 Miles per zone

Optimization of wireless and video requirements and careful radio design combined with advanced MIMO technology enable ABonAir engineers to extend the system range up to full 1 Km/ 0,.6 Miles in clear line of site. In drone application with a clear line of sight, the range can be extended to 2 KM / 1.2 Miles.

Bi-Directional radio with per pixel acknowledgment

In uni-directional links, the transmitter sends video content to the receiver without receiving any feedback. In bi-directional links, both transmitter and receiver can send and receive data and control information: a packet acknowledgment mechanism identifies errors and quickly fixes them (by re-transmitting the corrupted data) before the frame is presented. This enables bi-directional solutions to assure that all the data is well received without errors hence increase picture quality.

Gold mount or V-lock battery mount Suitable for any production

As an international company, ABonAir’s systems support both battery type to enable any production and any camera use.

AB507 Tech Specs