Data Channel Protocol (selectable in banks of 4 ch.)

RS-232C, RS-422 or RS-485 Data

Data Configuration (RS422 mode supports RS485)

Data Channels 0 & 1=RS422 I/O, 2 & 3=RS232 I/O; No termination.

Data Ch 0, 1 & 2=RS422 I/O, 3=RS422 In & RS232 Out; RS422 Termination ON. Data Channels 0 thru 3=RS232 I/O; No termination.

Data Rate

DC to 115.2 Kbps

Data and Audio I/O’s

44 pins D-Type Connector, Optional screw terminal adapter

Bit Error Rate

< 1×10-9

Signal to noise

> 90 dB

Frequency response to 20 Hz to 20 KHz

< +/- 0.1 dB

Distortion

< 0.05%

Audio output level

Unity

Maximum input & output level, 600 Ohm

+18 dBm

Audio output impedance, balanced

50 Ohms

Audio input impedance, balanced

600 Ohms or High

Power dissipation

< 15 Watts, per unit

AC operation

110 or 220 VAC (optional 48VDC)

Operating temperature

-40° to +75°C

Operating Humidity

0-95% non-condensing

Wavelength

1310/1550nm

Output Power, minimum

0 dBm Singlemode

Receiver Sensitivity

-24 dBm Singlemode

Optical Loss Budget, minimum

24 dBm Singlemode

Portable and Wall-mount:

7” L x 5 ¾” W x 1 ¾” H

Triple Rack-mount Kit for 3 modules (Part number -RMT):

7” L x 19” W x 1 ¾” H

UTIL-200-DVM 10 Slot Tray

13 ¾” L x 19” W x 3 ½” H

Fiber Optics, Voice and Data Multiplexers:

FDT-2500-35

DATA Transceiver with 12 Channels of Bi-directional Data, 2 Channels of Bi-directional Audio, and 8 Channels of Relay or Tally Control,  Singlemode 1310nm TX, 1550nm RX, -0 dBm, ST connector, Sensitivity –25 dB. (Requires FDT-2500-53 & AD-125 Interface Adapter) (May require – RMT, -BLANK)

FDT-2500-53

DATA Transceiver with 12 Channels of Bi-directional Data, 2 Channels of Bi-directional Audio, and 8 Channels of Relay or Tally Control,   Singlemode 1550nm TX, 1310nm RX, -0 dBm, ST connector, Sensitivity –25 dB. ( Requires FDT-2500-35) (Requires AD-125 Interface Adapter) (May require -RMT, -BLANK)

-RMT

Triple Rack-mount Kit (1 set )

-BLANK

Blank panel for rack-mounting kit

AD-FDT-2500

Break-out Adapter for FDT-2500to Quick-release screw terminal connectors for 12 Bi-directional Data, 2 Audio Inputs, 2 Audio Outputs and 8 Relay/Tally channels, 1 RU ( Requires 2 )