23 Spectrum Pointe Drive, Suite 206, Lake Forest, CA 92630  [email protected] 1-949-777-5435
Select Page

Fibermux 18 Ch HD SDI 1 Fiber Optic Active Wavelength Re-mapper and Multiplexer over

SKU: Fibermux Categories: ,

Description

Fibermux for Small and Medium Enterprise: Video Transport on Single Fiber

 

Features:

  • Turns any digital optical signal into CWDM
  • Put upto 18 optical signals or up to 18 SDI video on 1 fiber
  • Optical signals up to 4.25Gb/sec/input
  • Video signals up to 3Gb/sec/input
  • Repeats and re-transmits with new optical budget
  • Plug and play
  • No longer a need for wavelength-specific spares in CWDM apps
  • Easy access to installed fiber infrastructures
  • Extends useful life of legacy fiber equipment
  • Small and portable
  • Faster set and strike with fewer cables

 

Applications:

  • Sports Broadcasting
  • Shared control rooms
  • Remote studios/STL’s
  • Tele-Medicine
  • Distance learning
  • Corporate A/V
  • Taking advantage of stadium and campus fiber infrastructures

 

Overview:

The VidOptic Fiberbux was designed and built to help engineers and designers to be able to recover from situations where there are many signals to move over fiber, but not enough available fibers due to a lack of access to run more fiber or full cable trays. It can input any digital optical signal with a data rate of up to 4.25Gb/sec and it will be received and then re-transmitted at a CWDM wavelength and launched into the CWDM multiplexer. At the other end of the link, the signal is then de-multiplexed and restored. Up to six optical signals can be combined without the complexity of having specific CWDM lasers, and their spares, for each of the optical sources.

Alternately, the BNC inputs and outputs can be used to transport up to six SDI signals up to full, uncompressed 3Gb/sec, on just one fiber. And the built-in reclockers ensure that your signals arrive in pristine condition.

Since the Fibermux is receiving and then re-transmitting the optical signal, you get a fresh optical budget that allows transmission over even longer distances. And this doesn’t work just for VidOvation equipment. Any optical signal that is digital (even analog signals that are digitally encoded) and less than 4.25Gb/sec can be used.

The VidOptic Fibermux can be used as a stand-alone device or mounted three per single RU with our convenient rack mount kits. So whether the customer is optimizing their fibers within a permanent facility infrastructure or getting the most out of available fibers at a remote venue, we have you covered. With a Fibermux, the customer ready for the last minute signal requests that always seem to arise. It’s the most economical way to maximize fiber usage today while providing excess capacity for tomorrow.

 

Specifications:

SDI Input/Output

Bit Rates 19 Mbps to 3Gbps
Connectors 1 BNC
Impedence 75 Ohms
Signal Level 800 mV nominal pp
Standard SMPTE 425M, 297M, 292M, 259M-C & DVB-ASI
Return Loss  >15 dB at 5 MHz – 1.485 GHz, >10 dB at 1.5 GHz to 3 GHz
Jitter (wideband)  <0.3 UI
Optical Input/Output
Data Rates  Up to 4.25Gbps
Connectors  ST,SC
Input Range  1250 – 1650nm
Input power : -7 to -15 dBm
Interface Digital optical
Output Power -3 dBm typical
Output Range Muxed CWDM freq.
Electrical/Mechanical/Environmental
Dimensions FM-6000: 6.75” x 5.5” x 1.75”
Weight 1 lb.
Dimensions FM-12000 & 18000: 19” x 5.5” x 1.75”
Weight  3 lb.
Power 9-24 VDC, <20 watts
Temperature 0 to +55 C°
Humidity 0 to 95% non-condensing

Ordering Information

Model

FM-6000 Select ST or SC

FM-6000-TX-ST

6 Ch. Fiber Saver Transmitter for up to 6 optical digital signals up to 4.25GB/sec or SDI up to 3gb/sec

FM-6000-RX-ST

6 Ch. Fiber Saver Receiver for up to 6 optical digital signals up to 4.25GB/sec or SDI up to 3gb/sec

FM-6000-DEMUX-ST

6 Ch. FiberSaver Optical Demultiplexer: 1 multiplexed optical input from FS-6000-TX-ST, 6 optical outputs

FM-3×3-TRX-ST

3 x 3 Ch. FiberSaver Transceiver/Remapper, 1 fiber HUT-MUX: Optimized for the SMPTE HUT, 3 inputs & 3 outputs (BNC or opti- cal) over 1 fiber. 2 Required

4×2 & 2×4 and 1×5 & 5×1 also available. Ask your VidOvation representative for details

Accessories

RMT

Rack mount kit, 1 RU for up to three, triple sized modules

BP-T

Rack mount kit, 1

 

Model

FM-12000 Select ST or SC

FM-12000-TX-ST

12 Ch. FiberMux Transmitter for up to 12 optical digital signals up to 4.25GB/sec or SDI up to 3gb/sec

FM-12000-RX-ST

12 Ch. FiberMux Receiver for up to 6 optical digital signals up to 4.25GB/sec or SDI up to 3gb/sec

FM-12000-DEMUX-ST

12 Ch. FiberMux Optical Demultiplexer: 1 multiplexed optical input from FS-6000-TX-ST, 6 optical outputs

FM-6×6-TRX-ST

6 x 6 Ch. FiberMux Transceiver/Remapper, 1 fiber HUT-MUX: Optimized for the SMPTE HUT, 6 inputs & 6 outputs (BNC or opti- cal) over 1 fiber.

Ask your VidOvation representative about other combinations of TX & RX

Accessories

PS-18000

Spare Power Supply for HD-18000 unit

 

Model

FM-18000 Select ST or SC

FM-18000-TX-ST

18 Ch. Fiber Saver Transmitter for up to 18 optical digital signals up to 4.25GB/sec or SDI up to 3gb/sec

FM-18000-RX-ST

18 Ch. Fiber Saver Receiver for up to 18 optical digital signals up to 4.25GB/sec or SDI up to 3gb/sec

FM-18000-DEMUX-ST

18 Ch. FiberSaver Optical Demultiplexer: 1 multiplexed optical input from FM-6000-TX-ST, 18 optical outputs

FM-9×9-TRX-ST

9 x 9 Ch. FiberSaver Transceiver/Remapper, 1 fiber HUT-MUX: Optimized for the SMPTE HUT, 9 inputs & 9 outputs (BNC or opti- cal) over 1 fiber.

Ask a VidOvation representative about other combinations of TX & RX

Accessories

PS-18000

Spare Power Supply for HD-18000 unit

 

Additional information

SKU

Reviews

There are no reviews yet.

Be the first to review “Fibermux 18 Ch HD SDI 1 Fiber Optic Active Wavelength Re-mapper and Multiplexer over”