Select Page

FVT/FVR-2000-USB-DVI KVM and USB Over Two Multi Mode Fibers

SKU: FVT/FVR-2000-USB-DVI Categories: ,


FVT/FVR-2000-USB-DVI for Long Haul Transmission of USB Signals Over Fiber Optics


Fully Uncompressed Fiber Optic Video Transmission System



  • Fully uncompressed to 1920 x 1200
  • Supports DVI-D to WUXGA
  • Supports HDMI
  • Supports HDCP
  • Self-Detecting EDID
  • 2 fibers (50 or 62.5 Multi Mode)
  • 2-Port USB 2 hub @ TX
  • 4-Port USB 2 hub @ RX
  • Up to 480Mb/sec
  • RX Supports high powered devices up to 500mA
  • ST, SC or LC
  • Supports all OS’s
  • Plug and Play
  • Throw-down or rack



  • Commodity and stock exchanges
  • Medical and MRI displays
  • Advertising and signs
  • Sporting and concert video displays
  • Digital cinema
  • Radar displays
  • Air traffic Control
  • Military info displays



The VidOptic FVT/FVR-2000-USB-DVI is designed to transport DVI computer graphics while extending computer control via USB. With integrated USB hubs on both sides of the link, the VidOptic FVT/FVR-2000-USB-DVI goes far beyond a standard remote desktop allowing the easy addition of other peripherals such as printers, scanners or even web cams. All on two multi mode fibers.

The video transport section supports a high–quality DVI-D interface and will significantly increase the transmission distance limitations of high resolution DVI video and computer graphics over multi mode fiber.The VidOptic FVT/FVR-2000-USB-DVI will automatically collect EDID information from the display and adjust accordingly to give you plug and play convenience.

The VidOptic FVT/FVR-2000-USB-DVI system will transport virtually any VESA-compliant DVI signal from 640×480 VGAup to and including 1920×1200 WUXGA. Standard 24-pin DVI connectors are provided at each side of the link. HDMI is supported via an included adapter cable.

Each end also incorporates an integrated USB 2.0 hub for all of your peripherals for easy connection convenience and less desktop clutter. Do you use high-powered devices on your USB Bus? The RX unit supplies up to 500mAper output and solves that problem, too. All USB connectors are standard “A”type.

As with all VidOvation products, rack kits are available for rack mounting up to three units in a single RU. And for your optical connections, choose between ST, FC, SC or LC for easy integration into your fiber backbone.



DVI connector 1 IN on TX, 1 OUT on RX
Scan rates As per VESA standards
Standards DVI-D up to WUXGA, HDMI via adapter
Resolutions Up to 1920×1200 single-link
Standard Up to USB 2.0
Connectors 2 Type A on TX via hub, 3 Type A on RX via hub
Operating Wavelengths 850 and 1271-1591nm
TX Laser output power -8 dBm, Class 1
Receiver Sensitivity Up to -18 dBm
Fiber Compatibility 2 Multimode Fibers
Optical Connector ST, LC, SC
Distance limit 1 km
Mechanical, Environmental
Dimensions (LxWxH) 6.75” x 5.5” x 1.75”
Weight 2 lbs.
Temperature Range -0° to +70°C
Humidity Range 0 to 95% RH Noncondensing
Power Input 2.5mm jack Center pin +
Power rating, nominal 50w max@14 VDC
Power Requirement 15w @9-24VDC


Ordering Information:


Connector type = ST, SC or LC


DVI Single Link TX, WUXGA, 1920 x 1200, w/ USB 2.0 hub for keyboard, mouse & other USB peripheral, 2 Fibers, Multimode


DVI Single Link RX, WUXGA, 1920 x 1200, w/ USB 2.0 hub for keyboard, mouse & other USB peripheral, 2 Fibers, Multimode



Replacement Power Supply for KVM-6000 and 1000 units


Three Output DC Power Supply for up to three KVM-1000 modules


Triplee Rack-mount Kit (1 kit)


Blank panel for RMT rack-mounting kit


There are no reviews yet.

Be the first to review “FVT/FVR-2000-USB-DVI KVM and USB Over Two Multi Mode Fibers”