H-1SDI-DVBS2 - VidOvation Corporation
23 Spectrum Pointe Drive, Suite 206, Lake Forest, CA 92630  [email protected] 1-949-777-5435
Select Page

HD/SD-SDI 720p/1080i/1080p Encoder + Satellite DVB-S/S2 Modulator  

It is integrated  HD encoder with DVB-S/S2 modulator – HD up to 1080p HD/SD-SDI input , H.264 / MPEG2 encoding

It also  have ASI input, ysor passing external TS from different encoder or muxes external TS with the TS our unit encoders.

It is integrated  HD encoder with DVB-S/S2 modulator – HD up to 1080p HD/SD-SDI input , H.264 / MPEG2 encoding

It also have ASI input, ysor passing external TS from different encoder or muxes external TS with the TS our unit encoders.

Thor DVB-S/S2 Encoder & Modulator is an integrated HD Video Encoder with the sattelitte S2 modulator. Hot- swapable modules with diferent video inputs  (CVBS/SDI/HDMI/YPbPr…) are available.

It has also 1 channel ASI input for external  TS (MPEG2 or H.264) multiplexing  . It outputs ASI and DVB-S/S2 RF (IF Optional) simultaneously.

The signal source could be SDI camera, HDMI Blue-ray players and etc. It has web-based NMS GUI interface for easy online management.

Featuring its high performance and low cost, the S2 is especially used by TV stations or DSNG systems to encode SD/HD programs and output to uplink.

Model Selection

TWO MODELS AVAILABLE: L-band or IF (Intermediate Frequency)

1)  H-1SDI-DVBS   with ( 950Mhz – 2100Mhz)   L-band  RF output

2)  H-1SDI-DVBS-IF with  IF (50-200mhz) RF output  

Base Main  Model H-1SDI-DVBS2  has 1 HD/SD-SDI input and L-Band RF DVB-S/S2 Output

 The configuration page for S2 modulator with L-band 950-2100 Mhz RF output; or IF: 50-200MHz

H-1SDI-DVBS

H-1SDI-DVBS-IF

1 HD/SD-SDI Input / L-Band RF DVB-S/S2 Output

1 HD/SD-SDI  Input / IF Output

 H-1HDMI-DVBS

H-1HDMI-DVBS-IF

1 HDMI video  Input / L-Band RF DVB-S/S2 Output

1 HDMI Input / IF Output

H-1CVBS-DVBS

H-1CVBS-DVBS-IF

1  CVBS Video Input / L-Band RF DVB-S/S2 Output

1 Analog CVBS Input / IF Output

H-1RGB-DVBS

H-1RGB-DVBS-IF

1  YPbPr Video  Input / L-Band RF DVB-S/S2 Output

1 YPbPr Video  Input / IF Output

   

Specification

low 70-250mn latency models  avialable
  • Input
SDI or HDMI or  YPbPr or CVBS up to 1080P60
  • Resolurion :

1280x720P 60 / 59.94 / 50 Hz
1920x1080I 60 / 59.94 / 50 Hz

1920*1080_60P, 1920*1080_50P, (-for MPEG4 AVC/H.264 only)

1920*1080_60i, 1920*1080_50i,

1280*720_60p, 1280*720_50P

720*480_60i, 720*576_50i

 

  • Video Codecs
MPEG-2 HD 1.5-19.5 Mbps
H.264 HD 0.8-19.5 Mbps
  • Audio Codecs
MPEG-1 Layer II
MPEG-2 AAC
MPEG-4 AAC AC3 Dolby Audio Dolby Passthrough
  • Audio Sample Rate
48 kHz
  • Audio Bit Rates
64 kbps, 96 kbps, 128 kbps, 192 kbps, 256 kbps, 320 kbps
  • Outuput

DVB-S/S2 RF (IF Optional) output; ASI output

DVB-S/S2 Modulation Section

DVB-S QPSK: FEC 1/2,2/3,3/4,5/6,7/8

DVB-S2 QPSK: FEC 1/2,3/5,2/3,3/4,4/5,5/6,8/9,9/10

DVB-S2 8PSK FEC 3/5,2/3,3/4,5/6,8/9,9/10

RF output: 950.00-2150.00 MHz, 10Khz step

IF output: 50-200MHz (MODEL SPECIFIC)

Symbol rate: 0.05-20.0Msps

Roll Off: 0.35, 0.25, 0.2

Output level: -10db~-41.5db

  • RF Frequency Range
RF output: 950.00-2150.00 MHz, 10Khz step
  • RF Power Level
Output level: -10db~-41.5db
  • DVB-ASI Output
BNC Connector: 1-60 Mbps
  • DVB-ASI Input
BNC Connector: 1-120 Mbps
Programs Selected by PID
Programs Muxed to all Outputs
  • IPTV Output (Optional)
MPEG-TS MPTS over UDP
Unicast and Multicast Supported
  • Power Input
100-240 VAC Auto Switching
~ 20 W
  • Dimensions
19 x 17 x 2 Inches
  • Weight
9 Pounds
  • Operating Temperature
32-110 F