Multi-input CATV QAM / ATSC / DVB-S2 / ISDB-T trans Modulator with IP Out

Inputs are :

• 4 RF Tuners : DVB-S/S2 or QAM or DVB-T or ATSC
• 2 ASI Inputs  

Outputs are:

• 2 RF carriers : QAM or ATSC or DVB-T or ISDB-T
• 2 ASI’s Output
• MPTS IP Output

Thor Broadcast Transmodulation systems are a 4 RF input modulator and program stream multiplexer with CAM support via 4 CI slots. They are available for QAM (DVB-C), Satellite (DVB-S/S2), and terrestrial (ATSC)(DVB-T) radio frequency RF signal sources. RF signal types can easily be interchanged by removing the modules(you can not upload firmware to change the modulation functionality, this is hardware based). Full configuration and management is available on the front panel LCD and keypad, and remote access and monitoring is available on a dedicated NMS network port for control through a web browser. Program streams available as well as the IP and ASI inputs can be multiplexed and remapped in any order. Independent output pipes for both ASI and IP are fully configurable.  Industry standard support for Conditional Access is provided by 4 Common Interface (CI) slots. These slots support CAM modules such as CableCard or any other system using the PCMCIA interface. This platform is ideal for program aggregation and multiplexing in cable TV headends and corporate MATV systems.

Features

• Modulate 4 RF carriers including all sub programs and streams
• Provides industry standard multiplexed and remapped outputs on ASI & IP
• 9x IP stream outputs (8 SPTS, 1 MPTS) in UDP, RTP, or RTSP video protocols
• Advanced network managment system on dedicated network port and IP address
• Modulator available in QAM (DVB-C), Satellite (DVB-S2) or OTA (DVB-T) — (model dependant)
• Supports Closed Caption 608 and 708 systems, supports Dolby AC/3 Pass Through
• H-4LNB-QAM-IP-LL      4 satellite LNB’s RF + 2 ASI’s to QAM and IP
• H-4ATSC-QAM-IP-LL   4 ATSC RF +2 ASI’s to QAM and IP

Model Selection

H-4-ATSC-QAM  – 4 OFF  AIR  ATSC channels (frequencies)  to CATV QAM , IP, ASI

H-4-DVBS2-QAM  – 4 satellite  channels (frequencies)  to CATV QAM , IP, ASI

H-4-DVB-T-QAM  –  4 OFF  AIR  DVB-T channels (frequencies)  to CATV  QAM , IP, ASI

H-4-ATSC-ATSC –  4 OFF  AIR  ATSC channels (frequencies)  to ATSC trans – modulator, + IP +ASI

H-4-DVBT-QAM –  4 OFF  AIR  DVB-T channels (frequencies)  to QAM trans- modulator, + IP, ASI

H-4-DVBS2-ATSC –  4 satellite channels (frequencies)  to ATSC trans- modulator, + IP, ASI

H-4-DVBS2-DVBT –  4 satellite channels (frequencies)  to DVB-T trans- modulator, + IP, ASI

H-4-DVBS2-ISDB-T –  4 satellite channels (frequencies)  to ISDB-T trans- modulator, + IP, ASI

Specification