MRMC POWER SUPPLY UNIT 320W WITH SLIDELINK 3.0
Power Supply Unit for a set of devices: slider, remote head, lens drives, etc. Suitable for setups up to 320W.
Integrated network adapter – for advanced configuration, studio setups, Wi-Fi, Slideye 2.0 and Dragonframe software.
POWER FOR ALL
A robust power adapter with a power output of up to 320W will run all your motion control devices. Thanks to the wide input voltage range (100-240V), you won’t need to worry about separate power bricks during worldwide travels. The universal IEC C14 inlet will help you find a suitable power cable, even in the most exotic locations.
MOTION CONTROL SIMPLIFIED
Are you tired of all those cables? So are we. That’s why we developed a system, that requires only one cable for each device. You don’t need separate cables for power and data. There’s only one robust wire with professional, heavy-duty plugs.
All you have to do is daisy-chain all your drives and enjoy the simplicity of the system.
Our new Power Supply Units are not a regular AC chargers. They’re a central hub of your motion control setup.
You can plug your controller directly to the PSU, and all your devices powered from that source are connected to the controller.
With an integrated network module (SLIDELINK 3.0), you can use Ethernet or Wi-Fi to connect a group of motion control devices with the controller (that may be the KAIROS controller, a PC with a DRAGONFRAME software or the SLIDEKAMERA’s SLIDEYE 2.0 app).
OPTIONAL DRAGONFRAME BRIDGE
After enabling the DRAGONFRAME functionality, SLIDELINK v3.0 can be connected to your computer via USB or Wi-Fi and become a bridge between DRAGONFRAME software and the SLIDEKAMERA motion control setup.
width: 90 mm
length: 346 mm
height: 44 mm (w/o an antenna)
100-240V 3.5A 50/60Hz
36V 8.9A 50/60Hz
AC power input: IEC C14 inlet
controller: mini-Lemo 4-pin (includes 12V power out for the controller)
HET-BUS & DC 36V: LEMO 6-pin
Slidelink v3.0 I/O:
- PSU 320 - AC adapter with a Slidelink 3.0 module
- 110/230V power cable
- Wi-Fi antenna