openGear OG KVM over IP -
Select Page

openGear OG KVM over IP

When combined with the Apantac KVM over IP receiver and an off-the-shelf Gigabit Ethernet switch this KVM over IP solution functions as an expandable KVM switch to allow multiple users to have access to multiple computers.

  • Dashboard control enabled
  • 10 cards can fit into an openGear OG-X frame
  • Based on Gigabit Ethernet Technology (IGMP and Jumbo frame), outputs both copper or fiber
  • Requires KVM-IP-Rx, KVM-IP-Rx-P, KVM-IP-Rx-F to complete the system
  • Multi-mode Fiber – support up to 550m (OM2/OM3)
  • Single-mode Fiber – Supports up to 10 km
  • Copper – Supports up to 170 meters point to point extension with CAT6 cable
  • Copper – Supports up to 100 meters when used with a GigE switch
  • Supports point-to-point (unicast), point-to-multi-point (multicast) for audio/video distribution
  • Perform similarly to an expandable KVM switch when bundled with a GigE switch
  • Supports bi-directional stereo audio; embedded HDMI and external stereo input
  • Supports RS-232 communication between Tx and Rx
  • Built-in webpage for configuration
  • Connection manager software for Tx/Rx management
  • Supports resolutions up to 3840×2160@30Hz
  • Advanced EDID management functionality. Built-in EDID, EDID pass through, copy EDID and sharing EDID
  • Built-in scaler on the receiver
  • Plug and play and hot swappable cards

Description

openGear OG KVM over IP

When combined with the Apantac KVM over IP receiver and an off-the-shelf Gigabit Ethernet switch this KVM over IP solution functions as an expandable KVM switch to allow multiple users to have access to multiple computers.

  • Dashboard control enabled
  • 10 cards can fit into an openGear OG-X frame
  • Based on Gigabit Ethernet Technology (IGMP and Jumbo frame), outputs both copper or fiber
  • Requires KVM-IP-Rx, KVM-IP-Rx-P, KVM-IP-Rx-F to complete the system
  • Multi-mode Fiber – support up to 550m (OM2/OM3)
  • Single-mode Fiber – Supports up to 10 km
  • Copper – Supports up to 170 meters point to point extension with CAT6 cable
  • Copper – Supports up to 100 meters when used with a GigE switch
  • Supports point-to-point (unicast), point-to-multi-point (multicast) for audio/video distribution
  • Perform similarly to an expandable KVM switch when bundled with a GigE switch
  • Supports bi-directional stereo audio; embedded HDMI and external stereo input
  • Supports RS-232 communication between Tx and Rx
  • Built-in webpage for configuration
  • Connection manager software for Tx/Rx management
  • Supports resolutions up to 3840×2160@30Hz
  • Advanced EDID management functionality. Built-in EDID, EDID pass through, copy EDID and sharing EDID
  • Built-in scaler on the receiver
  • Plug and play and hot swappable cards

OG-KVM-IP-Tx

VIDEO

Input: HDMI
Output: HDMI Loop out + SFP (Fiber or copper)

AUDIO

Input: 2 of the 4 pin phoenix connector
Output: 2 of the 4 pin phoenix connector

USB

Tx Side: USB Type B (Female)

SYSTEM LINK

SFP (Fiber or copper)

RS-232 BAUD RATE

2 of the 4-pin Phoenix connector up to 115,200 bps, full duplex

VIDEO RESOLUTION

Up to 3840x2160@30Hz

INTERCONNECT CABLE

Standard CAT6/CAT6a/CAT7 network cable, single mode fiber or multi-mode fiber (OM2/OM3)

MAXIMUM COPPER CABLE LENGTH

170m point-to-point
100m when connected to a switch

MAXIMUM FIBER CABLE LENGTH

10 km on single mode
550m on multi-mode cables

Reviews

There are no reviews yet.

Be the first to review “openGear OG KVM over IP”

Reviews

There are no reviews yet.

Be the first to review “openGear OG KVM over IP”