Select Page

openGear OG SDI to HDMI/DVI Converter & Scalers

OG-Pinnacle-C

SDI to HDMI/DVI Converter/Scaler w/ Crop & Zoom

The Scaler (Model: OG-Pinnacle-C) includes a feature set to crop/zoom, and provide horizontal/vertical shifts of SDI video to feed Video Wall tiles, LED Walls or Monitor Walls. Each Scaler card is configured to display one part of the source picture on a tile or a monitor. It accepts and auto-detects a 3G/HD/SD-SDI signal, and has an active input loop for feeding several Scaler cards from the same signal without the need for external distribution. It offers an HDMI/DVI output and a SDI output.

The OG-Pinnacle-C Scaler is the first video wall processor for the openGear platform. The ability to crop, zoom and shift SDI makes this new Scaler card ideal for LED Walls and Studio Backdrops.

  • openGear 3.0 card-based form factor
  • 3G/HD/SD-SDI to SDI/HDMI converter/scaler
  • Crop and Zoom for Region of Interest (ROI)
  • Shift horizontally or vertically
  • Built-in scaler/de-interlacer
  • SDI output that matches HDMI output
  • Remote control for preset recall
  • Requires an openGear frame with Advanced Networking (onboard Ethernet Switch)
  • Automatic input aspect ratio detection
  • 5 year limited warranty

OG-Pinnacle-L

SDI to HDMI/DVI Converter/Scaler with Loudness Monitoring

SDI to HDMI/DVI Converter/Scaler with Loudness Monitoring for openGear Platform

  • openGear 3.0 card-based form factor
  • Dashboard control enabled
  • Requires an openGear frame with Advanced Networking (onboard Ethernet Switch)
  • 3G/HD/SD to HDMI converter/scaler w/loudness monitoring
  • ATSC A/85 and EBU R128 loudness measurement modes
  • Loudness and dial norm monitoring over time
  • Built-in scaler/de-interlacer
  • SDI output that matches HDMI output
  • Analog audio monitoring output
  • Embedded audio on HDMI output
  • Selectable On-Screen Display (OSD) elements
  • 16 channels of embedded audio
  • AFD/WSS
  • Safe area
  • Dynamic UMD (TSL)
  • CC 608 /708
  • Remote control for preset recall
  • Automatic input aspect ratio detection
  • Built-in alarm detections – no audio, audio high/low, no video video black, video frozen GPI contacts, can be configured
  • 5 year limited warranty

OG-Pinnacle

SDI to HDMI/DVI Converter/Scaler

SDI to HDMI/DVI Converter / Scaler for openGear Platform

  • openGear 3.0 card-based form factor
  • Dashboard control enabled
  • Requires an openGear frame with Advanced Networking (onboard Ethernet Switch)
  • 3G/HD/SD-SDI to HDMI converter/scaler
  • Built-in scaler/de-interlacer
  • SDI output that matches HDMI output
  • Analog audio monitoring output
  • Embedded audio on HDMI output
  • Selectable On-Screen Display (OSD) elements
  • 16 channels of embedded audio
  • AFD/WSS
  • Safe area
  • Dynamic UMD (TSL) CC 608 /708
  • Remote control for preset recall
  • Automatic input aspect ratio detection
  • Built-in alarm detections – no audio, audio high/low, no video, video black, video frozen GPI contacts, can be configured
  • 5 year limited warranty

Description

OG-Pinnacle-C

TOTAL WINDOWS

1

INPUTS

3G/HD/SD-SDI/Composite

OUTPUTS

1 x HDMI/DVI
1 x SDI

HDMI (OG-Pinnacle-RM)

800×480 to 1920×1200 (1080p) 50/59.94/60Hz

RJ45 (OG-Pinnacle-RMx)

Up to 35 feet with passive receiver
Up to 115 feet with active receiver (option)

SDI

Matching the HDMI output resolution up to 3G

SERIAL DIGITAL

SMPTE 424M 292M, 259M

EQUALIZATION

120m at 2.97 Gbps
140m at 1.48 Gbps
400m at 270 Mbps
with Belden 1694A

RETURN LOSS

> 15db up to 1.485 Gbps
> 10db up to 3G

EMBEDDED AUDIO

SMPTE-272M-A

COMPOSITE

NTSC (SMPTE-170M), PAL (ITU624-2)

SIGNAL LEVEL

1V nominal

IMPEDANCE

75 ohm

DC OFFSET

0V, + – 0.1V

RETURN LOSS

40db up to 5MHz

GPI

8 for tally or AXP (ASCII command)

IP

100 Base-T, TSL, AXP_Lite protocol

POWER

15W

OG-Pinnacle-L

TOTAL WINDOWS

1

INPUTS

3G/HD/SD-SDI/Composite

OUTPUTS

1 x HDMI/DVI
1 x SDI

SERIAL DIGITAL

SMPTE 424M 292M, 259M

EQUALIZATION

120m at 2.97 Gbps
140m at 1.48 Gbps
400m at 270 Mbps
with Belden 1694A

RETURN LOSS

> 15db up to 1.485 Gbps
> 10db up to 3G

EMBEDDED AUDIO

SMPTE-272M-A

COMPOSITE

NTSC (SMPTE-170M), PAL (ITU624-2)

SIGNAL LEVEL

1V nominal

IMPEDANCE

75 ohm

DC OFFSET

0V, + – 0.1V

RETURN LOSS

40db up to 5MHz

HDMI (OG-Pinnacle-L-RM)

800×480 to 1920×1200 (1080p) 50/59.94/60Hz

RJ45 (OG-Pinnacle-L-RMx)

Up to 35 feet with passive receiver
Up to 115 feet with active receiver (option: HDMI-1-R)

SDI

Matching the HDMI output resolution up to 3G

ON-SCREEN DISPLAY

Borders, Labels, Tallies, Audio meters, Alarm tags, Safe area markers

GPI

8 for tally or AXP (ASCII command)

IP

100 Base-T, TSL, AXP_Lite protocol

OG-Pinnacle

TOTAL WINDOWS

1

INPUTS

3G/HD/SD-SDI/Composite

OUTPUTS

1 x HDMI/DVI
1 x SDI

SERIAL DIGITAL

SMPTE 424M 292M, 259M

EQUALIZATION

120m at 2.97 Gbps
140m at 1.48 Gbps
400m at 270 Mbps
with Belden 1694A

RETURN LOSS

> 15db up to 1.485 Gbps
> 10db up to 3G

EMBEDDED AUDIO

SMPTE-272M-A

COMPOSITE

NTSC (SMPTE-170M), PAL (ITU624-2)

SIGNAL LEVEL

1V nominal

IMPEDANCE

75 ohm

DC OFFSET

0V, + – 0.1V

RETURN LOSS

40db up to 5MHz

HDMI (OG-Pinnacle RM)

800×480 to 1920×1200 (1080p) 50/59.94/60Hz

RJ45 (OG-Pinnacle RMx)

Up to 35 feet with passive receiver
Up to 115 feet with active receiver (option: HDMI-1-R)

SDI

Matching the HDMI output resolution up to 3G

ON-SCREEN DISPLAY

Borders, Labels, Tallies, Audio meters, Alarm tags, Safe area markers

GPI

8 for tally or AXP (ASCII command)

IP

100 Base-T, TSL, AXP_Lite protocol

Reviews

There are no reviews yet.

Be the first to review “openGear OG SDI to HDMI/DVI Converter & Scalers”