Wireless Range up to
750 – 5000+ ft
Cuts through interference
with 12 newly-opened
Connects to all Bolt 6
and Bolt 4K devices
12G SDI &
4K HDMI SUPPORT
12G-SDI + 4K HDMI
supports DCI 4K
The 6GHz Advantage
Less Signal Congestion, More Bandwidth
For years, wireless signals have broadcasted over the 5GHz bands within U-NII
1 through 3. In addition to 5GHz, Bolt 6 utilizes U-NII 5, aka “6GHz”—with 12
new channels to access a new clear radio frequency (RF) environment. This
means fewer devices competing for bandwidth, less interference, and the
ability for more wireless links to coexist in a single area.
BOLT SERIES CROSS-COMPATIBILITYPair with up to 6 Receivers.
The Bolt 6 Series uses both the 6GHz and 5GHz unlicensed
bands, so you can avoid signal congestion by using the U-NII 5
capability in Bolt 6, while retaining the ability to operate in
5GHz bands. Every Bolt 6 TX and RX device can be paired
with any Bolt 4K device —regardless of range. The
maximum range of the system in this scenario is always limited
by the shortest range. In order to use 6GHz (U-NII 5), you will
need a Bolt 6 on both the TX and RX side.
Up to 50% less fan noise than Bolt 4K.
Improved thermal efficiency for better performance.
Redesigned TX weight for better builds.
Antennas with Flex Appeal
Bolt 6 Series devices feature all-new flexible and rugged H
and Array Antennas that hold up to the rigors of
production. Learn more in our blog below.
Unlock the possibilities
Teradek’s Bolt 6 XT Transmitters come with an
integrated 5-pin USB connector for effortless
pairing with SmallHD Smart 7 Monitors, allowing
you to wirelessly control RED®, ARRI, and Sony
VENICE cameras at a range of up to 5000+ft.
Control start/stop, ISO, white balance, and more.